BS EN 10147-1992 Specification for continuously hot-dip zinc coated structural steel sheet and strip. Technical delivery conditions
|
ID： |
F02F12137281447BA130344C832DDF28 |
|
文件大小(MB)： |
0.21 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10147:1992,Incorporating,Amendment Nos. 1,and 2,Specification for,Continuously hot-dip,zinc coated structural,steel strip and sheet —,Technical delivery,conditions,The European Standard EN 10147:1991 with the incorporation of its amendment,A1:1995 has the status of a British Standard,ICS 77.140.50,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:44:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10147:1992,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 June 1996,. BSI 04-1999,The following BSI references,relate to the work on this,standard.:,Committee reference ISE/10,Draft for comment 90/39695 DC,ISBN 0 580 14999 4,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee ISE/10, Flat rolled steel products, upon which the following bodies,were represented:,British Railways Board,British Steel Industry,Cold Rolled Sections Association,Society of Motor Manufacturers and Traders Limited,The following bodies were also represented in the drafting of the standard,through subcommittees and panels:,British Welded Steel Tube Association,Coated Metals Limited,Department of the Environment (Property Services Agency),International Tin Research Institute,Metal Roof Deck Association,National Association of Steel Stockholders,Paintmakers’ Association of Great Britain Ltd.,Zinc Development Association,Amendments issued since publication,Amd. No. Date Comments,8722 May 1996,9639 October 1997 Indicated by a sideline in the margin,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:44:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10147:1992,. BSI 04-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10147 3,National annex NA (informative) Mechanical properties and,bend mandrel diameters for material over 3 mm thick 11,List of references Inside back cover,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:44:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10147:1992,ii . BSI 04-1999,National foreword,This British Standard has been prepared by Technical Committee ISE/10 and is,the English language version of EN 10147:1991 Continuously hot-dip zinc coated,structural steel strip and sheet for cold forming — Technical delivery conditions.,It incorporates amendment 1:1995. Amendment No. 2 is published to correct,typographical errors.,National annex NA gives the mechanical properties, mandrel diameters and,coatings available for continuously hot dip coated flat products over greater,thickness than 3 mm.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross-references,Publications referred to Corresponding British Standard,EN 10002-1:1990 BS EN 10002 Tensile testing of metallic materials,Part 1:1990 Method of test at ambient temperature,EN 10025:1993 BS EN 10025:1993 Hot rolled products of non-alloy,structural steels — Technical delivery conditions,BS EN 10027 Designation systems for steel,EN 10027-1:1992 Part 1:1992 Steel names, principal symbols,EN 10027-2:1991 Part 2:1992 Steel numbers,EN 10079:1992 BS EN 10079:1993 Definition of steel products,EN 10142:1990 BS EN 10142:1991 Specification for continuously,hot-dip zinc coated low carbon steel sheet and strip for,cold forming: technical delivery conditions,EN 10143:1993 BS EN 10143:1993 Continuously hot-dip coated steel,sheet and strip. Tolerances on dimensions and shape,EN 10147:1991 BS EN 10147:1992 Specification for continuously,hot-dip zinc coated structural steel sheet and strip.,Technical delivery conditions,EN 10204:1991 BS EN 10204:1991 Metallic products. Types of,inspection documents,EURONORM 12 BS 1639:1964 Methods for bend testing of metals,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN tile page, pages 2 to 12, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on,the inside front cover.,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:44:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10147,November 1991,+ A1,June 1995,ICS 77.140.50,Descriptors: Iron and steel products, metal pl……
……